Shuvessa Chakraborty, 𝗠𝗜𝗦𝗧 (𝗔𝗘) graduate has joined the World’s Largest Aircraft Manufacturer The Boeing Company as 𝐒𝐞𝐧𝐢𝐨𝐫 𝐀𝐏𝐐𝐏 𝐐𝐮𝐚𝐥𝐢𝐭𝐲 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫 on May 2023 – at Wichita, Kansas, USA.
He graduated from the 𝐀𝐞𝐫𝐨𝐧𝐚𝐮𝐭𝐢𝐜𝐚𝐥 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫𝐢𝐧𝐠 (𝐀𝐄) department of Military Institute of Science and Technology (𝗠𝗜𝗦𝗧). He passed his HSC from 𝐁𝐢𝐫𝐒𝐡𝐫𝐞𝐬𝐡𝐭𝐡𝐚 𝐍𝐨𝐨𝐫 𝐌𝐨𝐡𝐚𝐦𝐦𝐚𝐝 𝐑𝐢𝐟𝐥𝐞𝐬 𝐏𝐮𝐛𝐥𝐢𝐜 𝐂𝐨𝐥𝐥𝐞𝐠𝐞 and SSC from 𝐀𝐧𝐧𝐚𝐝𝐚 𝐆𝐨𝐯𝐭. 𝐒𝐜𝐡𝐨𝐨𝐥, 𝐁𝐫𝐚𝐡𝐦𝐚𝐧𝐛𝐚𝐫𝐢𝐚.
He has worked as a 𝐒𝐞𝐧𝐢𝐨𝐫 𝐌𝐚𝐧𝐮𝐟𝐚𝐜𝐭𝐮𝐫𝐢𝐧𝐠 𝐐𝐮𝐚𝐥𝐢𝐭𝐲 𝐀𝐬𝐬𝐮𝐫𝐚𝐧𝐜𝐞 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫 𝐋𝐞𝐯𝐞𝐥-𝐈𝐈𝐈 at Spirit AeroSystems, Inc., which is one of the world’s largest manufacturers & aerospace designer for commercial Airplanes, defense platforms, and business/regional Jet Planes located at Wichita, Kansas, USA. (August 2022 – May 2023).
His job responsibilities at 𝗦𝗽𝗶𝗿𝗶𝘁 𝗔𝗲𝗿𝗼𝗦𝘆𝘀𝘁𝗲𝗺𝘀 include the following –
• 𝘐𝘮𝘱𝘭𝘦𝘮𝘦𝘯𝘵 𝘢𝘯𝘥 𝘦𝘹𝘦𝘤𝘶𝘵𝘦 𝘈𝘗𝘘𝘗 𝘸𝘪𝘵𝘩 𝘥𝘪𝘧𝘧𝘦𝘳𝘦𝘯𝘵 𝘊𝘳𝘰𝘴𝘴-𝘧𝘶𝘯𝘤𝘵𝘪𝘰𝘯𝘢𝘭 𝘵𝘦𝘢𝘮𝘴 𝘢𝘭𝘰𝘯𝘨
𝘸𝘪𝘵𝘩 𝘷𝘢𝘳𝘪𝘰𝘶𝘴 𝘴𝘶𝘱𝘱𝘭𝘪𝘦𝘳.
• 𝘛𝘳𝘢𝘪𝘯 & 𝘵𝘦𝘢𝘤𝘩 𝘤𝘳𝘰𝘴𝘴-𝘧𝘶𝘯𝘤𝘵𝘪𝘰𝘯𝘢𝘭 𝘵𝘦𝘢𝘮 𝘮𝘦𝘮𝘣𝘦𝘳𝘴 𝘰𝘯 𝘈𝘗𝘘𝘗.
• 𝘗𝘦𝘳𝘧𝘰𝘳𝘮 & 𝘦𝘹𝘦𝘤𝘶𝘵𝘦 𝘥𝘪𝘧𝘧𝘦𝘳𝘦𝘯𝘵 𝘱𝘩𝘢𝘴𝘦𝘴 𝘰𝘧 𝘈𝘗𝘘𝘗.
• 𝘌𝘹𝘦𝘤𝘶𝘵𝘦 𝘥𝘪𝘧𝘧𝘦𝘳𝘦𝘯𝘵 𝘥𝘦𝘭𝘪𝘷𝘦𝘳𝘢𝘣𝘭𝘦𝘴 𝘰𝘧 𝘈𝘗𝘘𝘗 𝘭𝘪𝘬𝘦 𝘋𝘍𝘔𝘌𝘈, 𝘗𝘍𝘔𝘌𝘈, 𝘔𝘚𝘈, 𝘚𝘗𝘊,
𝘊𝘰𝘯𝘵𝘳𝘰𝘭 𝘗𝘭𝘢𝘯 𝘸𝘪𝘵𝘩 𝘔𝘍𝘛
• 𝘚𝘶𝘣𝘫𝘦𝘤𝘵 𝘮𝘢𝘵𝘵𝘦𝘳 𝘦𝘹𝘱𝘦𝘳𝘵 𝘰𝘯 𝘈𝘗𝘘𝘗 𝘦𝘭𝘦𝘮𝘦𝘯𝘵𝘴- 𝘋𝘍𝘔𝘌𝘈, 𝘗𝘍𝘔𝘌𝘈, 𝘊𝘰𝘯𝘵𝘳𝘰𝘭 𝘱𝘭𝘢𝘯,
𝘗𝘗𝘈𝘗, 𝘔𝘚𝘈
• 𝘗𝘦𝘳𝘧𝘰𝘳𝘮𝘴 𝘙𝘊𝘊𝘈 𝘸𝘪𝘵𝘩 𝘤𝘳𝘰𝘴𝘴-𝘧𝘶𝘯𝘤𝘵𝘪𝘰𝘯𝘢𝘭 𝘵𝘦𝘢𝘮 𝘶𝘴𝘪𝘯𝘨 8𝘋, 5 𝘸𝘩𝘺’𝘴 𝘢𝘯𝘥 𝘍𝘪𝘴𝘩𝘣𝘰𝘯𝘦.
• 𝘙𝘦𝘤𝘰𝘮𝘮𝘦𝘯𝘥𝘴 𝘢𝘯𝘥 𝘴𝘶𝘱𝘱𝘰𝘳𝘵𝘴 𝘵𝘩𝘦 𝘪𝘮𝘱𝘭𝘦𝘮𝘦𝘯𝘵𝘢𝘵𝘪𝘰𝘯 𝘰𝘧 𝘤𝘰𝘳𝘳𝘦𝘤𝘵𝘪𝘷𝘦 𝘢𝘤𝘵𝘪𝘰𝘯𝘴 𝘵𝘩𝘢𝘵 𝘢𝘳𝘦
𝘯𝘦𝘤𝘦𝘴𝘴𝘢𝘳𝘺 𝘵𝘰 𝘳𝘦𝘥𝘶𝘤𝘦 𝘰𝘳
𝘦𝘭𝘪𝘮𝘪𝘯𝘢𝘵𝘦 𝘯𝘰𝘯𝘤𝘰𝘯𝘧𝘰𝘳𝘮𝘢𝘯𝘤𝘦 𝘵𝘰 𝘥𝘦𝘴𝘪𝘨𝘯 𝘴𝘱𝘦𝘤𝘪𝘧𝘪𝘤𝘢𝘵𝘪𝘰𝘯𝘴.
• 𝘋𝘦𝘷𝘦𝘭𝘰𝘱 𝘢𝘯𝘥 𝘶𝘴𝘦 𝘴𝘵𝘢𝘵𝘪𝘴𝘵𝘪𝘤𝘢𝘭 𝘮𝘦𝘵𝘩𝘰𝘥𝘰𝘭𝘰𝘨𝘪𝘦𝘴 𝘵𝘰 𝘦𝘯𝘴𝘶𝘳𝘦 𝘵𝘩𝘢𝘵 𝘴𝘱𝘦𝘤𝘪𝘧𝘪𝘦𝘥 𝘭𝘦𝘷𝘦𝘭𝘴 𝘰𝘧
𝘴𝘢𝘧𝘦𝘵𝘺, 𝘳𝘦𝘭𝘪𝘢𝘣𝘪𝘭𝘪𝘵𝘺, 𝘢𝘯𝘥 𝘱𝘳𝘰𝘤𝘦𝘴𝘴
𝘤𝘢𝘱𝘢𝘣𝘪𝘭𝘪𝘵𝘺 𝘢𝘳𝘦 𝘢𝘤𝘩𝘪𝘦𝘷𝘦𝘥, 𝘮𝘢𝘪𝘯𝘵𝘢𝘪𝘯𝘦𝘥, 𝘰𝘳 𝘪𝘮𝘱𝘳𝘰𝘷𝘦𝘥.
• 𝘐𝘯𝘵𝘦𝘳𝘧𝘢𝘤𝘦𝘴 𝘸𝘪𝘵𝘩 𝘤𝘰𝘮𝘱𝘢𝘯𝘺 𝘦𝘮𝘱𝘭𝘰𝘺𝘦𝘦𝘴, 𝘴𝘶𝘱𝘱𝘭𝘪𝘦𝘳𝘴, 𝘤𝘶𝘴𝘵𝘰𝘮𝘦𝘳𝘴, 𝘢𝘯𝘥 𝘳𝘦𝘨𝘶𝘭𝘢𝘵𝘰𝘳𝘺
𝘢𝘨𝘦𝘯𝘤𝘪𝘦𝘴 𝘵𝘰 𝘦𝘯𝘴𝘶𝘳𝘦 𝘤𝘰𝘮𝘱𝘭𝘪𝘢𝘯𝘤𝘦
𝘸𝘪𝘵𝘩 𝘤𝘰𝘯𝘵𝘳𝘢𝘤𝘵𝘶𝘢𝘭, 𝘤𝘰𝘮𝘱𝘢𝘯𝘺, 𝘢𝘯𝘥 𝘳𝘦𝘨𝘶𝘭𝘢𝘵𝘰𝘳𝘺 𝘳𝘦𝘲𝘶𝘪𝘳𝘦𝘮𝘦𝘯𝘵𝘴.
• 𝘔𝘰𝘯𝘪𝘵𝘰𝘳 𝘘𝘶𝘢𝘭𝘪𝘵𝘺 𝘚𝘙𝘙 𝘥𝘢𝘵𝘢, 𝘴𝘩𝘢𝘳𝘦 𝘸𝘪𝘵𝘩 𝘭𝘦𝘢𝘥𝘦𝘳𝘴𝘩𝘪𝘱 𝘢𝘯𝘥 𝘱𝘭𝘢𝘯 𝘤𝘰𝘳𝘳𝘦𝘤𝘵𝘪𝘷𝘦 𝘢𝘤𝘵𝘪𝘰𝘯𝘴
𝘵𝘰 𝘳𝘦𝘥𝘶𝘤𝘦 𝘵𝘩𝘦 𝘕𝘊.
• 𝘓𝘦𝘢𝘥 𝘚𝘙𝘓 𝘮𝘦𝘦𝘵𝘪𝘯𝘨𝘴 𝘢𝘯𝘥 𝘴𝘶𝘱𝘱𝘰𝘳𝘵 𝘭𝘦𝘢𝘯 & 𝘤𝘰𝘯𝘵𝘪𝘯𝘶𝘰𝘶𝘴 𝘪𝘮𝘱𝘳𝘰𝘷𝘦𝘮𝘦𝘯𝘵 𝘰𝘯 𝘥𝘪𝘧𝘧𝘦𝘳𝘦𝘯𝘵
𝘱𝘳𝘰𝘨𝘳𝘢𝘮𝘴 𝘢𝘯𝘥 𝘱𝘳𝘰𝘫𝘦𝘤𝘵𝘴
• 𝘏𝘢𝘯𝘥𝘴-𝘰𝘯 𝘸𝘰𝘳𝘬 𝘦𝘹𝘱𝘦𝘳𝘪𝘦𝘯𝘤𝘦 𝘸𝘪𝘵𝘩 𝘉𝘰𝘦𝘪𝘯𝘨𝘴 737 & 767 𝘱𝘳𝘰𝘨𝘳𝘢𝘮
Shuvessa Chakraborty
He worked as a 𝐋𝐞𝐚𝐝 𝐌𝐚𝐧𝐮𝐟𝐚𝐜𝐭𝐮𝐫𝐢𝐧𝐠 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫 at Figeac Aero, which is one of the leading Aerospace Engineering Company in the USA. at Wichita, Kansas Metropolitan Area, USA. (October 2021 – May 2023)
His job responsibilities at 𝗙𝗶𝗴𝗲𝗮𝗰 𝗔𝗲𝗿𝗼 –
• 𝘙𝘦𝘷𝘪𝘦𝘸 𝘢𝘯𝘥 𝘢𝘱𝘱𝘳𝘰𝘷𝘦 𝘯𝘦𝘸 𝘸𝘰𝘳𝘬 𝘱𝘭𝘢𝘯𝘯𝘪𝘯𝘨 𝘵𝘰 𝘦𝘯𝘴𝘶𝘳𝘦 𝘤𝘰𝘮𝘱𝘭𝘪𝘢𝘯𝘤𝘦 𝘵𝘰 𝘤𝘶𝘴𝘵𝘰𝘮𝘦𝘳
𝘗𝘖 𝘢𝘯𝘥 𝘊𝘶𝘴𝘵𝘰𝘮𝘦𝘳 𝘦𝘯𝘨𝘪𝘯𝘦𝘦𝘳𝘪𝘯𝘨 𝘳𝘦𝘲𝘶𝘪𝘳𝘦𝘮𝘦𝘯𝘵𝘴
• 𝘙𝘦𝘷𝘪𝘦𝘸 𝘯𝘰𝘯-𝘤𝘰𝘯𝘧𝘰𝘳𝘮𝘪𝘯𝘨 𝘱𝘳𝘰𝘥𝘶𝘤𝘵, 𝘢𝘴𝘴𝘦𝘴𝘴 𝘤𝘰𝘯𝘥𝘪𝘵𝘪𝘰𝘯 𝘢𝘯𝘥 𝘷𝘪𝘢𝘣𝘭𝘦 𝘳𝘦𝘸𝘰𝘳𝘬, 𝘢𝘯𝘥
𝘱𝘳𝘦𝘱𝘢𝘳𝘦 𝘳𝘦𝘸𝘰𝘳𝘬 𝘸𝘰𝘳𝘬 𝘪𝘯𝘴𝘵𝘳𝘶𝘤𝘵𝘪𝘰𝘯𝘴. 𝘓𝘦𝘢𝘥 𝘔𝘙𝘉 & 𝘥𝘪𝘴𝘱𝘰𝘴𝘪𝘵𝘪𝘰𝘯
• 𝘊𝘳𝘦𝘢𝘵𝘦/𝘳𝘦𝘷𝘪𝘦𝘸 𝘕𝘊𝘙𝘴 𝘪𝘯 𝘢𝘤𝘤𝘰𝘳𝘥𝘢𝘯𝘤𝘦 𝘸𝘪𝘵𝘩 𝘥𝘳𝘢𝘸𝘪𝘯𝘨𝘴, 𝘴𝘱𝘦𝘤𝘪𝘧𝘪𝘤𝘢𝘵𝘪𝘰𝘯𝘴, 𝘢𝘯𝘥 𝘪𝘯𝘵𝘦𝘳𝘯𝘢𝘭
𝘳𝘦𝘲𝘶𝘪𝘳𝘦𝘮𝘦𝘯𝘵 𝘢𝘯𝘥 𝘱𝘦𝘳𝘧𝘰𝘳𝘮 𝘥𝘪𝘴𝘱𝘰𝘴𝘪𝘵𝘪𝘰𝘯
• 𝘊𝘳𝘦𝘢𝘵𝘦 𝘢𝘯𝘥 𝘮𝘢𝘯𝘢𝘨𝘦 𝘵𝘦𝘤𝘩𝘯𝘪𝘤𝘢𝘭 𝘢𝘴𝘱𝘦𝘤𝘵𝘴 𝘰𝘧 𝘵𝘩𝘦 𝘮𝘢𝘤𝘩𝘪𝘯𝘪𝘯𝘨 𝘢𝘴 𝘸𝘦𝘭𝘭 𝘢𝘴 𝘱𝘳𝘰𝘤𝘦𝘴𝘴𝘪𝘯𝘨
𝘪𝘯𝘤𝘭𝘶𝘥𝘪𝘯𝘨 𝘣𝘭𝘶𝘦𝘱𝘳𝘪𝘯𝘵 𝘢𝘯𝘥 𝘊𝘈𝘛𝘐𝘈 𝘮𝘰𝘥𝘦𝘭 𝘳𝘦𝘢𝘥𝘪𝘯𝘨, 𝘪𝘯𝘵𝘦𝘳𝘱𝘳𝘦𝘵𝘪𝘯𝘨 𝘴𝘱𝘦𝘤𝘪𝘧𝘪𝘤𝘢𝘵𝘪𝘰𝘯𝘴
𝘧𝘰𝘭𝘭𝘰𝘸𝘪𝘯𝘨 𝘤𝘶𝘴𝘵𝘰𝘮𝘦𝘳 𝘳𝘦𝘲𝘶𝘪𝘳𝘦𝘮𝘦𝘯𝘵𝘴.
• 𝘋𝘦𝘷𝘦𝘭𝘰𝘱 𝘥𝘦𝘵𝘢𝘪𝘭𝘦𝘥 𝘪𝘯𝘴𝘵𝘳𝘶𝘤𝘵𝘪𝘰𝘯𝘴 𝘧𝘳𝘰𝘮 𝘵𝘦𝘤𝘩𝘯𝘪𝘤𝘢𝘭 𝘴𝘰𝘶𝘳𝘤𝘦𝘴
• 𝘈𝘴𝘴𝘪𝘴𝘵 𝘮𝘢𝘤𝘩𝘪𝘯𝘪𝘯𝘨 𝘣𝘶𝘴𝘪𝘯𝘦𝘴𝘴 𝘶𝘯𝘪𝘵, 𝘢𝘴𝘴𝘦𝘮𝘣𝘭𝘺 𝘶𝘯𝘪𝘵, 𝘢𝘯𝘥 𝘱𝘳𝘰𝘤𝘦𝘴𝘴𝘪𝘯𝘨 𝘶𝘯𝘪𝘵 𝘰𝘯 𝘵𝘩𝘦
𝘮𝘦𝘵𝘩𝘰𝘥𝘴 𝘦𝘯𝘨𝘪𝘯𝘦𝘦𝘳𝘪𝘯𝘨 𝘵𝘢𝘴𝘬𝘴
• 𝘔𝘰𝘥𝘪𝘧𝘺 𝘢𝘯𝘺 𝘱𝘳𝘰𝘤𝘦𝘴𝘴𝘦𝘴 𝘢𝘯𝘥 𝘱𝘳𝘰𝘤𝘦𝘥𝘶𝘳𝘦𝘴 𝘵𝘩𝘢𝘵 𝘯𝘦𝘦𝘥 𝘮𝘰𝘥𝘪𝘧𝘪𝘦𝘥 𝘵𝘩𝘳𝘶 𝘔𝘢𝘯𝘶𝘧𝘢𝘤𝘵𝘶𝘳𝘪𝘯𝘨
𝘌𝘯𝘨𝘪𝘯𝘦𝘦𝘳𝘪𝘯𝘨
• 𝘊𝘳𝘦𝘢𝘵𝘦 2𝘋 𝘥𝘳𝘢𝘸𝘪𝘯𝘨𝘴 𝘢𝘯𝘥 𝘮𝘰𝘥𝘪𝘧𝘺 3𝘋 𝘮𝘰𝘥𝘦𝘭 𝘶𝘴𝘪𝘯𝘨 𝘊𝘈𝘛𝘐𝘈 𝘝5
• 𝘋𝘰𝘤𝘶𝘮𝘦𝘯𝘵 𝘥𝘢𝘵𝘢 𝘤𝘰𝘯𝘵𝘳𝘰𝘭, 𝘤𝘰𝘯𝘵𝘳𝘢𝘤𝘵 𝘳𝘦𝘷𝘪𝘦𝘸
• 𝘏𝘢𝘯𝘥𝘴-𝘰𝘯 𝘦𝘹𝘱𝘦𝘳𝘪𝘦𝘯𝘤𝘦 𝘸𝘪𝘵𝘩 𝘎𝘶𝘭𝘧𝘴𝘵𝘳𝘦𝘢𝘮’𝘴 𝘎650, 𝘎700, 𝘎280 𝘗𝘳𝘰𝘨𝘳𝘢𝘮,
𝘉𝘰𝘦𝘪𝘯𝘨’𝘴 777, 777𝘟, 787 𝘗𝘳𝘰𝘨𝘳𝘢𝘮, 𝘉𝘰𝘮𝘣𝘢𝘳𝘥𝘪𝘦𝘳 𝘎𝘭𝘰𝘣𝘢𝘭 7000&8000 𝘴𝘦𝘳𝘪𝘦𝘴,
𝘊𝘦𝘴𝘴𝘯𝘢’𝘴 𝘊𝘪𝘵𝘢𝘵𝘪𝘰𝘯 𝘭𝘢𝘵𝘪𝘵𝘶𝘥𝘦’𝘴 𝘚𝘬𝘪𝘯 𝘦𝘵𝘤.
• 𝘏𝘢𝘯𝘥𝘴-𝘰𝘯 𝘦𝘹𝘱𝘦𝘳𝘪𝘦𝘯𝘤𝘦 𝘸𝘪𝘵𝘩 𝘉𝘈𝘊, 𝘎𝘈𝘔𝘗𝘚, 𝘉𝘈𝘗𝘚, 𝘉𝘈𝘛𝘚, 𝘉𝘈𝘔𝘚, 𝘊𝘚𝘈𝘊 1,2,5,
𝘊𝘚𝘍𝘚, 𝘈𝘔𝘚, 𝘔𝘐𝘓 𝘚𝘱𝘦𝘤𝘴
• 𝘎𝘢𝘱 𝘈𝘯𝘢𝘭𝘺𝘻𝘦, 𝘦𝘴𝘵𝘪𝘮𝘢𝘵𝘦, 𝘢𝘯𝘥 𝘪𝘮𝘱𝘭𝘦𝘮𝘦𝘯𝘵 𝘗𝘊𝘙 (𝘗𝘳𝘰𝘨𝘳𝘢𝘮 𝘊𝘩𝘢𝘯𝘨𝘦 𝘙𝘦𝘲𝘶𝘦𝘴𝘵)
• 𝘈𝘤𝘵 𝘢𝘴 𝘧𝘰𝘤𝘢𝘭 𝘸𝘪𝘵𝘩𝘪𝘯 𝘵𝘩𝘦 𝘥𝘪𝘧𝘧𝘦𝘳𝘦𝘯𝘵 𝘥𝘦𝘱𝘢𝘳𝘵𝘮𝘦𝘯𝘵𝘴 𝘧𝘰𝘳 𝘢𝘭𝘭 𝘌𝘯𝘨𝘪𝘯𝘦𝘦𝘳𝘪𝘯𝘨 𝘊𝘩𝘢𝘯𝘨𝘦
𝘙𝘦𝘲𝘶𝘦𝘴𝘵 𝘔𝘢𝘯𝘢𝘨𝘦𝘮𝘦𝘯𝘵
• 𝘙𝘦𝘷𝘪𝘦𝘸𝘪𝘯𝘨 𝘦𝘯𝘨𝘪𝘯𝘦𝘦𝘳𝘪𝘯𝘨 𝘥𝘳𝘢𝘸𝘪𝘯𝘨𝘴 𝘧𝘰𝘳 𝘮𝘢𝘯𝘶𝘧𝘢𝘤𝘵𝘶𝘳𝘢𝘣𝘪𝘭𝘪𝘵𝘺, 𝘱𝘳𝘰𝘤𝘦𝘴𝘴 𝘤𝘢𝘱𝘢𝘣𝘪𝘭𝘪𝘵𝘺
• 𝘕𝘗𝘐, 𝘕𝘦𝘸 𝘱𝘳𝘰𝘥𝘶𝘤𝘵𝘪𝘰𝘯 𝘱𝘭𝘢𝘯𝘯𝘪𝘯𝘨, 𝘳𝘪𝘴𝘬 𝘢𝘴𝘴𝘦𝘴𝘴𝘮𝘦𝘯𝘵, 𝘧𝘦𝘢𝘴𝘪𝘣𝘪𝘭𝘪𝘵𝘺 𝘢𝘯𝘢𝘭𝘺𝘴𝘪𝘴
• 𝘐𝘮𝘱𝘭𝘦𝘮𝘦𝘯𝘵 𝘤𝘰𝘯𝘵𝘪𝘯𝘶𝘰𝘶𝘴 𝘪𝘮𝘱𝘳𝘰𝘷𝘦𝘮𝘦𝘯𝘵 𝘱𝘳𝘰𝘫𝘦𝘤𝘵𝘴 𝘢𝘯𝘥 𝘵𝘳𝘢𝘯𝘴𝘧𝘦𝘳 𝘭𝘦𝘢𝘯 𝘬𝘯𝘰𝘸𝘭𝘦𝘥𝘨𝘦 𝘵𝘰
𝘴𝘩𝘰𝘱 𝘧𝘭𝘰𝘰𝘳
• 𝘋𝘦𝘷𝘦𝘭𝘰𝘱, 𝘮𝘰𝘥𝘪𝘧𝘺 𝘢𝘯𝘥 𝘮𝘢𝘪𝘯𝘵𝘢𝘪𝘯 𝘔𝘦𝘵𝘩𝘰𝘥𝘴 𝘢𝘯𝘥 𝘌𝘯𝘨𝘪𝘯𝘦𝘦𝘳𝘪𝘯𝘨 𝘱𝘳𝘰𝘤𝘦𝘥𝘶𝘳𝘦𝘴.
He was an 𝗔𝗱𝗷𝘂𝗻𝗰𝘁 𝗟𝗲𝗰𝘁𝘂𝗿𝗲𝗿 of Wichita State University, which is one of the top-ranked Public Universities of the USA. (January 2021 – August 2021).
He worked as an 𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫 at Anton Paar USA. 𝗔𝗻𝘁𝗼𝗻 𝗣𝗮𝗮𝗿 𝗚𝗺𝗯𝗛 is the world’s leading organization that develops, produces, and distributes highly accurate laboratory instruments and process measuring systems, and provides custom-tailored automation and robotic solutions worldwide.
He worked here from April 2020 – December 2020 in the following role –
• 𝘗𝘦𝘳𝘧𝘰𝘳𝘮 𝘱𝘦𝘳𝘧𝘰𝘳𝘮𝘢𝘯𝘤𝘦 𝘢𝘯𝘥 𝘰𝘱𝘦𝘳𝘢𝘵𝘪𝘰𝘯 𝘲𝘶𝘢𝘭𝘪𝘧𝘪𝘤𝘢𝘵𝘪𝘰𝘯 𝘰𝘧 𝘱𝘩𝘢𝘳𝘮𝘢 𝘪𝘯𝘴𝘵𝘳𝘶𝘮𝘦𝘯𝘵𝘴
• 𝘊𝘳𝘦𝘢𝘵𝘪𝘰𝘯 𝘰𝘧 𝘤𝘰𝘯𝘵𝘳𝘰𝘭 𝘱𝘭𝘢𝘯𝘴 𝘢𝘯𝘥 𝘪𝘯𝘴𝘱𝘦𝘤𝘵𝘪𝘰𝘯 𝘱𝘭𝘢𝘯𝘴
• 𝘙𝘪𝘴𝘬 𝘢𝘯𝘢𝘭𝘺𝘴𝘪𝘴 𝘰𝘧 𝘯𝘦𝘸𝘭𝘺 𝘭𝘢𝘶𝘯𝘤𝘩𝘪𝘯𝘨 𝘤𝘩𝘢𝘳𝘢𝘤𝘵𝘦𝘳𝘪𝘻𝘢𝘵𝘪𝘰𝘯 𝘪𝘯𝘴𝘵𝘳𝘶𝘮𝘦𝘯𝘵𝘴 𝘣𝘢𝘴𝘦𝘥 𝘰𝘯 𝘙𝘗𝘕
• 𝘘𝘍𝘋(𝘘𝘶𝘢𝘭𝘪𝘵𝘺 𝘧𝘶𝘯𝘤𝘵𝘪𝘰𝘯 𝘥𝘦𝘱𝘭𝘰𝘺𝘮𝘦𝘯𝘵) 𝘢𝘯𝘢𝘭𝘺𝘴𝘪𝘴 𝘧𝘰𝘳 𝘕𝘗𝘐
• 𝘗𝘦𝘳𝘧𝘰𝘳𝘮 𝘍𝘔𝘌𝘈 𝘢𝘯𝘥 𝘱𝘳𝘰𝘤𝘦𝘴𝘴 𝘤𝘢𝘱𝘢𝘣𝘪𝘭𝘪𝘵𝘺 𝘢𝘯𝘥 𝘳𝘦𝘭𝘪𝘢𝘣𝘪𝘭𝘪𝘵𝘺 𝘢𝘯𝘢𝘭𝘺𝘴𝘪𝘴
• 𝘗𝘦𝘳𝘧𝘰𝘳𝘮 𝘩𝘢𝘳𝘥𝘸𝘢𝘳𝘦 𝘢𝘯𝘥 𝘴𝘰𝘧𝘵𝘸𝘢𝘳𝘦 𝘲𝘶𝘢𝘭𝘪𝘵𝘺 𝘢𝘴𝘴𝘶𝘳𝘢𝘯𝘤𝘦 𝘰𝘧 𝘵𝘩𝘦 𝘈𝘯𝘵𝘰𝘯 𝘗𝘢𝘢𝘳
𝘐𝘯𝘴𝘵𝘳𝘶𝘮𝘦𝘯𝘵𝘴
• 𝘊𝘶𝘴𝘵𝘰𝘮𝘦𝘳 𝘳𝘦𝘲𝘶𝘪𝘳𝘦𝘮𝘦𝘯𝘵𝘴 𝘢𝘯𝘢𝘭𝘺𝘴𝘪𝘴 𝘢𝘯𝘥 𝘵𝘳𝘢𝘯𝘴𝘧𝘰𝘳𝘮 𝘵𝘩𝘪𝘴 𝘳𝘦𝘲𝘶𝘪𝘳𝘦𝘮𝘦𝘯𝘵 𝘪𝘯𝘵𝘰 𝘥𝘦𝘴𝘪𝘨𝘯
𝘴𝘱𝘦𝘤𝘪𝘧𝘪𝘤𝘢𝘵𝘪𝘰𝘯
• 𝘗𝘦𝘳𝘧𝘰𝘳𝘮 𝘣𝘦𝘯𝘤𝘩𝘮𝘢𝘳𝘬𝘪𝘯𝘨 𝘰𝘯 𝘤𝘰𝘮𝘱𝘦𝘵𝘪𝘵𝘰𝘳𝘴’ 𝘱𝘳𝘰𝘥𝘶𝘤𝘵𝘴
• 𝘌𝘹𝘱𝘭𝘰𝘳𝘦 𝘯𝘦𝘸 𝘱𝘰𝘴𝘴𝘪𝘣𝘪𝘭𝘪𝘵𝘪𝘦𝘴 𝘰𝘧 𝘭𝘰𝘤𝘢𝘭𝘪𝘻𝘦𝘥 𝘮𝘢𝘵𝘦𝘳𝘪𝘢𝘭 𝘤𝘩𝘢𝘳𝘢𝘤𝘵𝘦𝘳𝘪𝘻𝘢𝘵𝘪𝘰𝘯 𝘰𝘧 𝘯𝘢𝘯𝘰𝘴𝘤𝘢𝘭𝘦
𝘵𝘩𝘪𝘯 𝘧𝘪𝘭𝘮𝘴 𝘵𝘰 𝘵𝘩𝘦 𝘤𝘩𝘢𝘭𝘭𝘦𝘯𝘨𝘪𝘯𝘨 𝘧𝘪𝘦𝘭𝘥 𝘰𝘧 𝘴𝘰𝘧𝘵/𝘣𝘪𝘰𝘮𝘢𝘵𝘦𝘳𝘪𝘢𝘭𝘴 𝘵𝘰 𝘴𝘰𝘭𝘪𝘥 𝘯𝘢𝘯𝘰 𝘤𝘰𝘮𝘱𝘰𝘴𝘪𝘵𝘦𝘴.
• 𝘐𝘯𝘷𝘦𝘴𝘵𝘪𝘨𝘢𝘵𝘦𝘴 𝘢𝘯𝘥 𝘢𝘴𝘴𝘪𝘴𝘵𝘴 𝘪𝘯 𝘳𝘦𝘴𝘱𝘰𝘯𝘥𝘪𝘯𝘨 𝘵𝘰 𝘤𝘶𝘴𝘵𝘰𝘮𝘦𝘳 𝘤𝘰𝘮𝘱𝘭𝘢𝘪𝘯𝘵𝘴 𝘰𝘳 𝘪𝘯𝘲𝘶𝘪𝘳𝘦𝘴
• 𝘙𝘦𝘴𝘦𝘢𝘳𝘤𝘩, 𝘸𝘳𝘪𝘵𝘦, 𝘱𝘳𝘦𝘴𝘦𝘯𝘵 – 𝘢𝘱𝘱𝘭𝘪𝘤𝘢𝘵𝘪𝘰𝘯 𝘯𝘰𝘵𝘦𝘴, 𝘵𝘦𝘤𝘩𝘯𝘪𝘤𝘢𝘭 𝘢𝘳𝘵𝘪𝘤𝘭𝘦𝘴, 𝘱𝘢𝘱𝘦𝘳𝘴, 𝘢𝘯𝘥
𝘱𝘰𝘴𝘵𝘦𝘳𝘴.
• 𝘌𝘹𝘱𝘦𝘳𝘵 𝘒𝘯𝘰𝘸𝘭𝘦𝘥𝘨𝘦 𝘪𝘯 𝘵𝘩𝘦 𝘧𝘪𝘦𝘭𝘥 𝘰𝘧 𝘕𝘢𝘯𝘰𝘪𝘯𝘥𝘦𝘯𝘵𝘢𝘵𝘪𝘰𝘯, 𝘕𝘢𝘯𝘰 𝘴𝘤𝘳𝘢𝘵𝘤𝘩, 𝘙𝘩𝘦𝘰𝘭𝘰𝘨𝘺,
𝘛𝘳𝘪𝘣𝘰𝘭𝘰𝘨𝘺, 𝘋𝘺𝘯𝘢𝘮𝘪𝘤 𝘔𝘦𝘤𝘩𝘢𝘯𝘪𝘤𝘢𝘭 𝘊𝘩𝘢𝘳𝘢𝘤𝘵𝘦𝘳𝘪𝘻𝘢𝘵𝘪𝘰𝘯, 𝘈𝘵𝘰𝘮𝘪𝘤 𝘧𝘰𝘳𝘤𝘦 𝘮𝘪𝘤𝘳𝘰𝘴𝘤𝘰𝘱𝘺,
𝘝𝘪𝘴𝘤𝘰𝘦𝘭𝘢𝘴𝘵𝘪𝘤𝘪𝘵𝘺, 𝘊𝘰𝘯𝘴𝘵𝘪𝘵𝘶𝘵𝘪𝘷𝘦, 𝘢𝘯𝘥 𝘕𝘶𝘮𝘦𝘳𝘪𝘤𝘢𝘭 𝘔𝘰𝘥𝘦𝘭𝘪𝘯𝘨
• 𝘋𝘦𝘵𝘦𝘳𝘮𝘪𝘯𝘦𝘴 𝘦𝘹𝘱𝘦𝘳𝘪𝘮𝘦𝘯𝘵𝘢𝘭 𝘥𝘦𝘴𝘪𝘨𝘯 𝘧𝘰𝘳 𝘱𝘳𝘰𝘴𝘱𝘦𝘤𝘵 𝘵𝘦𝘴𝘵𝘪𝘯𝘨, 𝘤𝘰𝘯𝘥𝘶𝘤𝘵𝘴 𝘮𝘢𝘵𝘦𝘳𝘪𝘢𝘭𝘴
𝘤𝘩𝘢𝘳𝘢𝘤𝘵𝘦𝘳𝘪𝘻𝘢𝘵𝘪𝘰𝘯 𝘵𝘦𝘴𝘵𝘪𝘯𝘨 𝘢𝘯𝘥
• 𝘱𝘦𝘳𝘧𝘰𝘳𝘮𝘴 𝘥𝘢𝘵𝘢 𝘢𝘯𝘢𝘭𝘺𝘴𝘪𝘴, 𝘳𝘦𝘱𝘰𝘳𝘵 𝘨𝘦𝘯𝘦𝘳𝘢𝘵𝘪𝘰𝘯, 𝘱𝘳𝘦𝘴𝘦𝘯𝘵𝘢𝘵𝘪𝘰𝘯 𝘢𝘯𝘥 𝘪𝘯𝘴𝘵𝘳𝘶𝘮𝘦𝘯𝘵
𝘥𝘦𝘮𝘰𝘯𝘴𝘵𝘳𝘢𝘵𝘪𝘰𝘯𝘴.
• 𝘊𝘩𝘢𝘳𝘢𝘤𝘵𝘦𝘳𝘪𝘻𝘦𝘴 𝘮𝘢𝘵𝘦𝘳𝘪𝘢𝘭𝘴 𝘶𝘴𝘪𝘯𝘨 𝘯𝘢𝘯𝘰𝘪𝘯𝘥𝘦𝘯𝘵𝘢𝘵𝘪𝘰𝘯, 𝘴𝘤𝘳𝘢𝘵𝘤𝘩, 𝘢𝘵𝘰𝘮𝘪𝘤 𝘧𝘰𝘳𝘤𝘦
𝘮𝘪𝘤𝘳𝘰𝘴𝘤𝘰𝘱𝘺, 𝘵𝘳𝘪𝘣𝘰𝘭𝘰𝘨𝘺, 𝘳𝘩𝘦𝘰𝘭𝘰𝘨𝘺.
• 𝘴𝘢𝘮𝘱𝘭𝘦 𝘵𝘦𝘴𝘵𝘪𝘯𝘨
• 𝘜𝘵𝘪𝘭𝘪𝘻𝘦 𝘢𝘥𝘷𝘢𝘯𝘤𝘦𝘥 𝘴𝘤𝘪𝘦𝘯𝘵𝘪𝘧𝘪𝘤 𝘬𝘯𝘰𝘸𝘭𝘦𝘥𝘨𝘦 𝘢𝘯𝘥 𝘱𝘳𝘪𝘯𝘤𝘪𝘱𝘭𝘦𝘴 𝘵𝘰 𝘦𝘥𝘶𝘤𝘢𝘵𝘦 𝘤𝘶𝘴𝘵𝘰𝘮𝘦𝘳𝘴 𝘰𝘯
𝘵𝘩𝘦 𝘱𝘳𝘰𝘱𝘦𝘳 𝘶𝘴𝘦 𝘰𝘧 𝘵𝘩𝘦 𝘪𝘯𝘴𝘵𝘳𝘶𝘮𝘦𝘯𝘵.
He worked as a 𝐌𝐚𝐧𝐮𝐟𝐚𝐜𝐭𝐮𝐫𝐢𝐧𝐠 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫 – 𝐋𝐞𝐚𝐝 𝐌𝐑𝐁 at Leading Technology Composites, Inc. at Wichita, Kansas Area, USA. (October 2019 – March 2020) on the following role –
• 𝘋𝘦𝘷𝘦𝘭𝘰𝘱 𝘮𝘢𝘯𝘶𝘧𝘢𝘤𝘵𝘶𝘳𝘪𝘯𝘨 𝘤𝘰𝘯𝘤𝘦𝘱𝘵𝘴 𝘢𝘯𝘥 𝘴𝘵𝘳𝘢𝘵𝘦𝘨𝘪𝘦𝘴 𝘵𝘰 𝘴𝘶𝘱𝘱𝘰𝘳𝘵 𝘣𝘶𝘴𝘪𝘯𝘦𝘴𝘴
𝘰𝘣𝘫𝘦𝘤𝘵𝘪𝘷𝘦𝘴.
• 𝘙𝘦𝘴𝘱𝘰𝘯𝘴𝘪𝘣𝘭𝘦 𝘧𝘰𝘳 𝘵𝘩𝘦 𝘴𝘩𝘰𝘳𝘵- 𝘢𝘯𝘥 𝘭𝘰𝘯𝘨-𝘵𝘦𝘳𝘮 𝘱𝘭𝘢𝘯𝘯𝘪𝘯𝘨 𝘢𝘤𝘵𝘪𝘷𝘪𝘵𝘪𝘦𝘴 𝘪𝘯𝘤𝘭𝘶𝘥𝘪𝘯𝘨 𝘱𝘳𝘰𝘤𝘦𝘴𝘴
𝘪𝘮𝘱𝘳𝘰𝘷𝘦𝘮𝘦𝘯𝘵 𝘶𝘵𝘪𝘭𝘪𝘻𝘪𝘯𝘨 𝘵𝘰𝘰𝘭𝘴 𝘴𝘶𝘤𝘩 𝘢𝘴 𝘙𝘦𝘭𝘪𝘢𝘣𝘪𝘭𝘪𝘵𝘺 𝘊𝘦𝘯𝘵𝘦𝘳𝘦𝘥 𝘔𝘢𝘪𝘯𝘵𝘦𝘯𝘢𝘯𝘤𝘦 (𝘙𝘊𝘔),
𝘍𝘢𝘪𝘭𝘶𝘳𝘦 𝘔𝘰𝘥𝘦𝘴 𝘢𝘯𝘥 𝘌𝘧𝘧𝘦𝘤𝘵𝘴 𝘈𝘯𝘢𝘭𝘺𝘴𝘪𝘴 (𝘍𝘔𝘌𝘈)
• 𝘋𝘦𝘷𝘦𝘭𝘰𝘱 𝘮𝘢𝘯𝘶𝘧𝘢𝘤𝘵𝘶𝘳𝘪𝘯𝘨 𝘮𝘦𝘵𝘩𝘰𝘥𝘰𝘭𝘰𝘨𝘪𝘦𝘴 𝘢𝘯𝘥 𝘤𝘳𝘦𝘢𝘵𝘦 𝘥𝘦𝘳𝘪𝘷𝘢𝘵𝘪𝘷𝘦 𝘥𝘦𝘭𝘪𝘷𝘦𝘳𝘢𝘣𝘭𝘦𝘴
𝘴𝘶𝘤𝘩 𝘢𝘴 𝘧𝘭𝘢𝘵 𝘱𝘢𝘵𝘵𝘦𝘳𝘯𝘴 𝘢𝘯𝘥 𝘭𝘢𝘴𝘦𝘳 𝘱𝘳𝘰𝘫𝘦𝘤𝘵𝘪𝘰𝘯 𝘱𝘳𝘰𝘨𝘳𝘢𝘮𝘴 𝘵𝘰 𝘮𝘢𝘯𝘶𝘧𝘢𝘤𝘵𝘶𝘳𝘪𝘯𝘨 𝘧𝘳𝘰𝘮
𝘤𝘶𝘴𝘵𝘰𝘮𝘦𝘳 𝘥𝘳𝘢𝘸𝘪𝘯𝘨𝘴/𝘴𝘱𝘦𝘤𝘪𝘧𝘪𝘤𝘢𝘵𝘪𝘰𝘯𝘴/𝘔𝘉𝘋/𝘋𝘗𝘋.
• 𝘊𝘳𝘦𝘢𝘵𝘦 𝘮𝘢𝘯𝘶𝘧𝘢𝘤𝘵𝘶𝘳𝘪𝘯𝘨 𝘱𝘭𝘢𝘯𝘯𝘪𝘯𝘨 𝘵𝘰 𝘥𝘦𝘧𝘪𝘯𝘦 𝘱𝘳𝘰𝘤𝘦𝘴𝘴𝘦𝘴 𝘢𝘯𝘥 𝘮𝘢𝘪𝘯𝘵𝘢𝘪𝘯
𝘤𝘰𝘯𝘧𝘪𝘨𝘶𝘳𝘢𝘵𝘪𝘰𝘯 𝘮𝘢𝘯𝘢𝘨𝘦𝘮𝘦𝘯𝘵. 𝘊𝘳𝘦𝘢𝘵𝘦 𝘙&𝘋 𝘫𝘰𝘣𝘴 𝘢𝘯𝘥 𝘳𝘦𝘸𝘰𝘳𝘬 𝘫𝘰𝘣𝘴/𝘪𝘯𝘴𝘵𝘳𝘶𝘤𝘵𝘪𝘰𝘯𝘴.
• 𝘋𝘦𝘴𝘪𝘨𝘯, 𝘳𝘢𝘱𝘪𝘥 𝘱𝘳𝘰𝘵𝘰𝘵𝘺𝘱𝘪𝘯𝘨, 𝘢𝘯𝘥 𝘳𝘦𝘷𝘪𝘦𝘸 𝘰𝘧 𝘵𝘰𝘰𝘭𝘪𝘯𝘨 𝘤𝘰𝘯𝘤𝘦𝘱𝘵𝘴.
• 𝘊𝘳𝘦𝘢𝘵𝘦 𝘕𝘰𝘯𝘤𝘰𝘯𝘧𝘰𝘳𝘮𝘢𝘯𝘤𝘦 𝘙𝘦𝘱𝘰𝘳𝘵𝘴 (𝘔𝘙𝘙), 𝘌𝘯𝘨𝘪𝘯𝘦𝘦𝘳𝘪𝘯𝘨 𝘚𝘱𝘦𝘤𝘪𝘧𝘪𝘤𝘢𝘵𝘪𝘰𝘯𝘴, 𝘙𝘰𝘰𝘵
𝘤𝘢𝘶𝘴𝘦 𝘢𝘯𝘢𝘭𝘺𝘴𝘪𝘴 (𝘙𝘊𝘈), 𝘊𝘰𝘳𝘳𝘦𝘤𝘵𝘪𝘷𝘦 𝘢𝘯𝘥 𝘗𝘳𝘦𝘷𝘦𝘯𝘵𝘪𝘷𝘦 𝘈𝘤𝘵𝘪𝘰𝘯 (𝘊𝘈𝘗𝘈)
• 𝘌𝘷𝘢𝘭𝘶𝘢𝘵𝘦 𝘯𝘦𝘸 𝘵𝘦𝘤𝘩𝘯𝘰𝘭𝘰𝘨𝘺, 𝘦𝘲𝘶𝘪𝘱𝘮𝘦𝘯𝘵, 𝘮𝘢𝘵𝘦𝘳𝘪𝘢𝘭, 𝘢𝘯𝘥 𝘮𝘢𝘯𝘶𝘧𝘢𝘤𝘵𝘶𝘳𝘪𝘯𝘨
𝘱𝘳𝘰𝘤𝘦𝘴𝘴𝘦𝘴.
• 𝘋𝘦𝘷𝘦𝘭𝘰𝘱 𝘢𝘯𝘥 𝘪𝘯𝘵𝘦𝘨𝘳𝘢𝘵𝘦 𝘤𝘶𝘴𝘵𝘰𝘮𝘦𝘳 𝘱𝘳𝘰𝘤𝘦𝘴𝘴𝘦𝘴, 𝘮𝘢𝘵𝘦𝘳𝘪𝘢𝘭𝘴, 𝘥𝘢𝘵𝘢 𝘢𝘯𝘥 𝘵𝘦𝘤𝘩𝘯𝘰𝘭𝘰𝘨𝘺 𝘵𝘰 𝘮𝘦𝘦𝘵 𝘮𝘢𝘯𝘶𝘧𝘢𝘤𝘵𝘶𝘳𝘪𝘯𝘨 𝘢𝘯𝘥 𝘥𝘦𝘭𝘪𝘷𝘦𝘳𝘺 𝘳𝘦𝘲𝘶𝘪𝘳𝘦𝘮𝘦𝘯𝘵𝘴.
• 𝘙𝘦𝘷𝘪𝘦𝘸 𝘢𝘯𝘥 𝘢𝘱𝘱𝘳𝘰𝘷𝘦 𝘴𝘶𝘱𝘱𝘭𝘪𝘦𝘳 𝘥𝘢𝘵𝘢 𝘵𝘰 𝘦𝘯𝘴𝘶𝘳𝘦 𝘮𝘢𝘯𝘶𝘧𝘢𝘤𝘵𝘶𝘳𝘪𝘯𝘨 𝘳𝘦𝘭𝘢𝘵𝘦𝘥
𝘳𝘦𝘲𝘶𝘪𝘳𝘦𝘮𝘦𝘯𝘵𝘴 𝘢𝘳𝘦 𝘮𝘦𝘵.
• 𝘐𝘯𝘷𝘦𝘴𝘵𝘪𝘨𝘢𝘵𝘦 𝘢𝘯𝘥 𝘳𝘦𝘴𝘰𝘭𝘷𝘦 𝘮𝘢𝘯𝘶𝘧𝘢𝘤𝘵𝘶𝘳𝘪𝘯𝘨, 𝘮𝘢𝘵𝘦𝘳𝘪𝘢𝘭, 𝘢𝘯𝘥 𝘱𝘳𝘰𝘤𝘦𝘴𝘴 𝘪𝘴𝘴𝘶𝘦𝘴.
• 𝘗𝘦𝘳𝘧𝘰𝘳𝘮 𝘱𝘳𝘰𝘥𝘶𝘤𝘪𝘣𝘪𝘭𝘪𝘵𝘺 𝘢𝘴𝘴𝘦𝘴𝘴𝘮𝘦𝘯𝘵𝘴 𝘧𝘰𝘳 𝘱𝘢𝘳𝘵 𝘰𝘳 𝘱𝘳𝘰𝘥𝘶𝘤𝘵 𝘥𝘦𝘴𝘪𝘨𝘯𝘴.
• 𝘗𝘳𝘰𝘷𝘪𝘥𝘦 𝘱𝘳𝘰𝘥𝘶𝘤𝘪𝘣𝘪𝘭𝘪𝘵𝘺 𝘪𝘯𝘱𝘶𝘵 𝘵𝘰 𝘥𝘦𝘴𝘪𝘨𝘯, 𝘮𝘢𝘯𝘶𝘧𝘢𝘤𝘵𝘶𝘳𝘪𝘯𝘨 𝘱𝘳𝘰𝘤𝘦𝘴𝘴𝘦𝘴 𝘢𝘯𝘥
𝘮𝘢𝘯𝘶𝘧𝘢𝘤𝘵𝘶𝘳𝘪𝘯𝘨 𝘵𝘦𝘤𝘩𝘯𝘰𝘭𝘰𝘨𝘪𝘦𝘴 𝘵𝘰 𝘮𝘦𝘦𝘵 𝘤𝘰𝘴𝘵 𝘢𝘯𝘥 𝘴𝘤𝘩𝘦𝘥𝘶𝘭𝘦𝘴, 𝘪𝘯𝘤𝘭𝘶𝘥𝘪𝘯𝘨 𝘱𝘳𝘰𝘤𝘦𝘴𝘴
𝘪𝘮𝘱𝘳𝘰𝘷𝘦𝘮𝘦𝘯𝘵𝘴.
• 𝘌𝘹𝘦𝘤𝘶𝘵𝘦 𝘦𝘯𝘨𝘪𝘯𝘦𝘦𝘳𝘪𝘯𝘨 𝘢𝘯𝘥 𝘱𝘭𝘢𝘯𝘯𝘪𝘯𝘨 𝘤𝘩𝘢𝘯𝘨𝘦𝘴 𝘪𝘯𝘤𝘭𝘶𝘥𝘪𝘯𝘨 𝘳𝘦𝘷𝘪𝘴𝘪𝘯𝘨 𝘳𝘦𝘭𝘦𝘢𝘴𝘦𝘥 𝘸𝘰𝘳𝘬
𝘰𝘳𝘥𝘦𝘳𝘴 𝘸𝘩𝘪𝘭𝘦 𝘮𝘢𝘪𝘯𝘵𝘢𝘪𝘯𝘪𝘯𝘨 𝘴𝘺𝘴𝘵𝘦𝘮 𝘪𝘯𝘵𝘦𝘨𝘳𝘪𝘵𝘺.
• 𝘓𝘦𝘢𝘥 𝘣𝘳𝘢𝘪𝘯𝘴𝘵𝘰𝘳𝘮𝘪𝘯𝘨 𝘢𝘯𝘥 𝘵𝘳𝘰𝘶𝘣𝘭𝘦𝘴𝘩𝘰𝘰𝘵𝘪𝘯𝘨 𝘴𝘦𝘴𝘴𝘪𝘰𝘯𝘴 𝘵𝘰 𝘳𝘦𝘴𝘰𝘭𝘷𝘦 𝘱𝘳𝘰𝘣𝘭𝘦𝘮𝘴.
• 𝘊𝘰𝘭𝘭𝘦𝘤𝘵, 𝘢𝘯𝘢𝘭𝘺𝘻𝘦 𝘢𝘯𝘥 𝘪𝘯𝘵𝘦𝘳𝘱𝘳𝘦𝘵 𝘮𝘢𝘯𝘶𝘧𝘢𝘤𝘵𝘶𝘳𝘪𝘯𝘨 𝘥𝘢𝘵𝘢 𝘵𝘰 𝘮𝘢𝘬𝘦 𝘴𝘰𝘶𝘯𝘥 𝘥𝘦𝘤𝘪𝘴𝘪𝘰𝘯𝘴
𝘢𝘯𝘥 𝘫𝘶𝘥𝘨𝘮𝘦𝘯𝘵𝘴 𝘵𝘩𝘢𝘵 𝘪𝘮𝘱𝘢𝘤𝘵 𝘱𝘳𝘰𝘥𝘶𝘤𝘵𝘪𝘰𝘯, 𝘱𝘦𝘳𝘴𝘰𝘯𝘯𝘦𝘭, 𝘢𝘯𝘥 𝘱𝘳𝘰𝘤𝘦𝘴𝘴𝘦𝘴.
• 𝘙𝘦𝘷𝘪𝘦𝘸 𝘯𝘰𝘯-𝘤𝘰𝘯𝘧𝘰𝘳𝘮𝘪𝘯𝘨 𝘱𝘳𝘰𝘥𝘶𝘤𝘵𝘴, 𝘢𝘴𝘴𝘦𝘴𝘴 𝘵𝘩𝘦 𝘤𝘰𝘯𝘥𝘪𝘵𝘪𝘰𝘯 𝘢𝘯𝘥 𝘷𝘪𝘢𝘣𝘭𝘦 𝘳𝘦𝘸𝘰𝘳𝘬 𝘢𝘯𝘥
𝘱𝘳𝘦𝘱𝘢𝘳𝘦 𝘳𝘦𝘸𝘰𝘳𝘬 𝘸𝘰𝘳𝘬 𝘪𝘯𝘴𝘵𝘳𝘶𝘤𝘵𝘪𝘰𝘯𝘴. 𝘓𝘦𝘢𝘥 𝘔𝘙𝘉 𝘢𝘯𝘥 𝘙𝘔𝘈 𝘢𝘤𝘵𝘪𝘷𝘪𝘵𝘪𝘦𝘴.
• 𝘓𝘪𝘢𝘪𝘴𝘦 𝘢𝘯𝘥 𝘱𝘳𝘰𝘷𝘪𝘥𝘦 𝘵𝘦𝘤𝘩𝘯𝘪𝘤𝘢𝘭 𝘴𝘶𝘱𝘱𝘰𝘳𝘵 𝘵𝘰 𝘲𝘶𝘢𝘭𝘪𝘵𝘺, 𝘱𝘶𝘳𝘤𝘩𝘢𝘴𝘪𝘯𝘨, 𝘱𝘳𝘰𝘥𝘶𝘤𝘵𝘪𝘰𝘯, 𝘢𝘯𝘥
𝘰𝘵𝘩𝘦𝘳 𝘥𝘦𝘱𝘢𝘳𝘵𝘮𝘦𝘯𝘵𝘴.
He worked as a 𝐌𝐚𝐧𝐮𝐟𝐚𝐜𝐭𝐮𝐫𝐢𝐧𝐠 𝐐𝐮𝐚𝐥𝐢𝐭𝐲 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫 at D-J Engineering, Inc. at Augusta, KS, USA. (August 2018 – August 2019) on the following role –
•𝘔𝘰𝘥𝘦𝘭 𝘗𝘢𝘳𝘵, 𝘢𝘴𝘴𝘦𝘮𝘣𝘭𝘺, 𝘋𝘳𝘢𝘧𝘵𝘪𝘯𝘨 & 𝘦𝘯𝘨𝘪𝘯𝘦𝘦𝘳𝘪𝘯𝘨 𝘥𝘳𝘢𝘸𝘪𝘯𝘨𝘴 𝘧𝘰𝘳 𝘯𝘦𝘸 𝘱𝘳𝘰𝘥𝘶𝘤𝘵 𝘶𝘴𝘪𝘯𝘨 𝘊𝘈𝘛𝘐𝘈 𝘝5
• 𝘊𝘰𝘭𝘭𝘢𝘣𝘰𝘳𝘢𝘵𝘦 𝘸𝘪𝘵𝘩 𝘌𝘯𝘨𝘪𝘯𝘦𝘦𝘳𝘪𝘯𝘨 𝘢𝘯𝘥 𝘘𝘈 𝘨𝘳𝘰𝘶𝘱𝘴 𝘧𝘰𝘳 𝘱𝘳𝘰𝘥𝘶𝘤𝘵 𝘱𝘭𝘢𝘯𝘯𝘪𝘯𝘨,
𝘥𝘦𝘷𝘦𝘭𝘰𝘱𝘮𝘦𝘯𝘵 & 𝘘𝘶𝘢𝘭𝘪𝘵𝘺
• 𝘗𝘦𝘳𝘧𝘰𝘳𝘮 𝘥𝘪𝘧𝘧𝘦𝘳𝘦𝘯𝘵 𝘔𝘦𝘤𝘩𝘢𝘯𝘪𝘤𝘢𝘭 𝘛𝘦𝘴𝘵𝘪𝘯𝘨 (𝘊𝘰𝘯𝘥𝘶𝘤𝘵𝘪𝘷𝘪𝘵𝘺 𝘵𝘦𝘴𝘵𝘪𝘯𝘨, 𝘏𝘢𝘳𝘥𝘯𝘦𝘴𝘴 𝘵𝘦𝘴𝘵𝘪𝘯𝘨,
𝘛𝘦𝘯𝘴𝘪𝘭𝘦 𝘛𝘦𝘴𝘵𝘪𝘯𝘨) 𝘰𝘯 𝘈𝘪𝘳𝘤𝘳𝘢𝘧𝘵 𝘗𝘢𝘳𝘵𝘴
• 𝘔𝘰𝘯𝘪𝘵𝘰𝘳 & 𝘨𝘪𝘷𝘦 𝘨𝘶𝘪𝘥𝘦𝘭𝘪𝘯𝘦𝘴 𝘵𝘰 𝘰𝘱𝘦𝘳𝘢𝘵𝘰𝘳𝘴 𝘪𝘯 𝘌𝘹𝘵𝘳𝘶𝘥𝘪𝘯𝘨 & 𝘏𝘦𝘢𝘵 𝘵𝘳𝘦𝘢𝘵𝘮𝘦𝘯𝘵
• 𝘗𝘦𝘳𝘧𝘰𝘳𝘮 𝘌𝘯𝘨𝘪𝘯𝘦𝘦𝘳𝘪𝘯𝘨 𝘣𝘭𝘶𝘦𝘱𝘳𝘪𝘯𝘵 𝘢𝘯𝘢𝘭𝘺𝘴𝘪𝘴 & 𝘮𝘦𝘢𝘴𝘶𝘳𝘦𝘮𝘦𝘯𝘵
• 𝘊𝘰𝘯𝘥𝘶𝘤𝘵 𝘙𝘦𝘭𝘪𝘢𝘣𝘪𝘭𝘪𝘵𝘺, 𝘍𝘢𝘪𝘭𝘶𝘳𝘦 & 𝘍𝘳𝘢𝘤𝘵𝘶𝘳𝘦 𝘢𝘯𝘢𝘭𝘺𝘴𝘪𝘴 𝘰𝘯 𝘥𝘪𝘧𝘧𝘦𝘳𝘦𝘯𝘵 𝘊𝘶𝘴𝘵𝘰𝘮𝘦𝘳 𝘈𝘪𝘳𝘤𝘳𝘢𝘧𝘵
𝘱𝘢𝘳𝘵𝘴
• 𝘊𝘳𝘦𝘢𝘵𝘦 𝘊𝘖𝘊 (𝘊𝘰𝘯𝘧𝘰𝘳𝘮𝘢𝘯𝘤𝘦 𝘰𝘧 𝘊𝘦𝘳𝘵𝘪𝘧𝘪𝘤𝘢𝘵𝘪𝘰𝘯𝘴) 𝘰𝘧 𝘏𝘦𝘢𝘵 𝘛𝘳𝘦𝘢𝘵𝘮𝘦𝘯𝘵 & 𝘌𝘹𝘵𝘳𝘶𝘴𝘪𝘰𝘯𝘴
& 𝘕𝘊𝘗’𝘴
• 𝘏𝘢𝘯𝘥𝘴-𝘰𝘯 𝘸𝘰𝘳𝘬𝘪𝘯𝘨 𝘦𝘹𝘱𝘦𝘳𝘪𝘦𝘯𝘤𝘦 𝘰𝘯 𝘈𝘚𝘌𝘈 𝘉𝘭𝘢𝘥𝘥𝘦𝘳 𝘏𝘺𝘥𝘳𝘢𝘶𝘭𝘪𝘤 𝘱𝘳𝘦𝘴𝘴, 𝘴𝘵𝘳𝘦𝘵𝘤𝘩
𝘱𝘳𝘦𝘴𝘴, 𝘚𝘩𝘳𝘪𝘯𝘬𝘢𝘨𝘦 𝘮𝘢𝘤𝘩𝘪𝘯𝘦, 𝘎𝘳𝘪𝘯𝘥𝘪𝘯𝘨, 𝘋𝘦𝘣𝘢𝘳, 𝘊𝘕𝘊 𝘮𝘢𝘤𝘩𝘪𝘯𝘪𝘯𝘨 𝘦𝘵𝘤.
• 𝘗𝘦𝘳𝘧𝘰𝘳𝘮 1𝘴𝘵 𝘈𝘳𝘵𝘪𝘤𝘭𝘦 𝘐𝘯𝘴𝘱𝘦𝘤𝘵𝘪𝘰𝘯 & 𝘋𝘪𝘦 𝘵𝘳𝘺𝘰𝘶𝘵 𝘐𝘯𝘴𝘱𝘦𝘤𝘵𝘪𝘰𝘯 𝘰𝘯 𝘥𝘪𝘧𝘧𝘦𝘳𝘦𝘯𝘵 𝘦𝘹𝘵𝘳𝘶𝘴𝘪𝘰𝘯𝘴.
• 𝘞𝘳𝘪𝘵𝘦 𝘊𝘕𝘊 𝘗𝘳𝘰𝘨𝘳𝘢𝘮𝘴, 𝘮𝘢𝘬𝘦 𝘮𝘰𝘥𝘪𝘧𝘪𝘤𝘢𝘵𝘪𝘰𝘯𝘴 𝘶𝘴𝘪𝘯𝘨 𝘊𝘈𝘛𝘐𝘈 𝘝5 (𝘗𝘳𝘪𝘴𝘮𝘢𝘵𝘪𝘤
𝘮𝘢𝘤𝘩𝘪𝘯𝘪𝘯𝘨, 𝘚𝘶𝘳𝘧𝘢𝘤𝘦 & 𝘈𝘥𝘷𝘢𝘯𝘤𝘦𝘥 𝘔𝘢𝘤𝘩𝘪𝘯𝘪𝘯𝘨)
• 𝘊𝘳𝘦𝘢𝘵𝘦 𝘔𝘗𝘙𝘴 (𝘔𝘢𝘯𝘶𝘧𝘢𝘤𝘵𝘶𝘳𝘪𝘯𝘨 𝘗𝘳𝘰𝘥𝘶𝘤𝘵𝘪𝘰𝘯 𝘗𝘭𝘢𝘯𝘯𝘪𝘯𝘨)
• 𝘋𝘦𝘢𝘭𝘴 𝘸𝘪𝘵𝘩 𝘥𝘪𝘧𝘧𝘦𝘳𝘦𝘯𝘵 𝘤𝘶𝘴𝘵𝘰𝘮𝘦𝘳 𝘴𝘱𝘦𝘤𝘴 (𝘉𝘈𝘊, 𝘎𝘈𝘔𝘗𝘚, 𝘈𝘔𝘚, 𝘈𝘚𝘛𝘔, 𝘈𝘕𝘚𝘐, 𝘐𝘚𝘖)
He worked as a 𝐀𝐞𝐫𝐨𝐬𝐩𝐚𝐜𝐞 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫 CAE SoftSys, Inc. At Irving TEXAS, USA. (January 2018 – August 2018) on the following role –
• 𝘗𝘳𝘰𝘷𝘪𝘥𝘦𝘥 𝘵𝘦𝘤𝘩𝘯𝘪𝘤𝘢𝘭 𝘴𝘶𝘱𝘱𝘰𝘳𝘵 𝘵𝘰 𝘤𝘭𝘪𝘦𝘯𝘵𝘴 𝘰𝘯 𝘣𝘦𝘩𝘢𝘭𝘧 𝘰𝘧 𝘋𝘢𝘴𝘴𝘢𝘶𝘭𝘵 𝘚𝘺𝘴𝘵𝘦𝘮𝘦𝘴 𝘧𝘰𝘳
𝘣𝘦𝘪𝘯𝘨 𝘝𝘢𝘭𝘶𝘦 𝘚𝘰𝘭𝘶𝘵𝘪𝘰𝘯
𝘗𝘢𝘳𝘵𝘯𝘦𝘳
• 𝘋𝘦𝘴𝘪𝘨𝘯 3-𝘋 𝘮𝘰𝘥𝘦𝘭𝘴 & 𝘦𝘯𝘨𝘪𝘯𝘦𝘦𝘳𝘪𝘯𝘨 𝘥𝘳𝘢𝘸𝘪𝘯𝘨𝘴 𝘧𝘰𝘳 𝘵𝘩𝘦 𝘯𝘦𝘸 𝘱𝘳𝘰𝘥𝘶𝘤𝘵 𝘶𝘴𝘪𝘯𝘨
𝘊𝘈𝘛𝘐𝘈 𝘝5 & 𝘚𝘰𝘭𝘪𝘥𝘸𝘰𝘳𝘬𝘴
• 𝘗𝘦𝘳𝘧𝘰𝘳𝘮 𝘍𝘌𝘈 𝘰𝘯 𝘥𝘪𝘧𝘧𝘦𝘳𝘦𝘯𝘵 𝘮𝘦𝘤𝘩𝘢𝘯𝘪𝘤𝘢𝘭 𝘱𝘢𝘳𝘵𝘴 𝘶𝘴𝘪𝘯𝘨 𝘈𝘣𝘢𝘤𝘶𝘴 & 𝘕𝘈𝘚𝘛𝘙𝘈𝘕/
𝘗𝘈𝘛𝘙𝘈𝘕
• 𝘋𝘦𝘴𝘪𝘨𝘯 𝘰𝘧 𝘭𝘪𝘨𝘩𝘵𝘸𝘦𝘪𝘨𝘩𝘵 𝘴𝘵𝘳𝘶𝘤𝘵𝘶𝘳𝘢𝘭 𝘢𝘪𝘳𝘤𝘳𝘢𝘧𝘵 𝘤𝘰𝘮𝘱𝘰𝘯𝘦𝘯𝘵𝘴 𝘴𝘶𝘤𝘩 𝘢𝘴 𝘸𝘪𝘯𝘨𝘴,
𝘧𝘶𝘴𝘦𝘭𝘢𝘨𝘦𝘴, 𝘦𝘮𝘱𝘦𝘯𝘯𝘢𝘨𝘦, 𝘦𝘵𝘤.
• 𝘊𝘰𝘯𝘥𝘶𝘤𝘵 𝘦𝘯𝘨𝘪𝘯𝘦𝘦𝘳𝘪𝘯𝘨 𝘢𝘯𝘢𝘭𝘺𝘴𝘪𝘴, 𝘪𝘯𝘤𝘭𝘶𝘥𝘪𝘯𝘨 𝘣𝘭𝘶𝘦𝘱𝘳𝘪𝘯𝘵 𝘳𝘦𝘢𝘥𝘪𝘯𝘨, 𝘥𝘳𝘢𝘸𝘪𝘯𝘨𝘴, 𝘢𝘯𝘥
𝘴𝘱𝘦𝘤𝘪𝘧𝘪𝘤𝘢𝘵𝘪𝘰𝘯𝘴
• 𝘗𝘦𝘳𝘧𝘰𝘳𝘮 𝘴𝘵𝘢𝘵𝘪𝘤, 𝘥𝘺𝘯𝘢𝘮𝘪𝘤 & 𝘮𝘰𝘥𝘢𝘭 𝘴𝘵𝘳𝘶𝘤𝘵𝘶𝘳𝘢𝘭 𝘢𝘯𝘢𝘭𝘺𝘴𝘪𝘴 𝘶𝘴𝘪𝘯𝘨 𝘈𝘕𝘚𝘠𝘚
𝘔𝘦𝘤𝘩𝘢𝘯𝘪𝘤𝘢𝘭 𝘸𝘰𝘳𝘬𝘣𝘦𝘯𝘤𝘩
• 𝘔𝘢𝘪𝘯𝘵𝘢𝘪𝘯𝘦𝘥 𝘱𝘢𝘳𝘵𝘯𝘦𝘳𝘴𝘩𝘪𝘱 𝘢𝘯𝘥 𝘤𝘰𝘯𝘥𝘶𝘤𝘵𝘦𝘥 𝘵𝘦𝘤𝘩𝘯𝘪𝘤𝘢𝘭 𝘴𝘶𝘱𝘱𝘰𝘳𝘵 𝘵𝘳𝘢𝘪𝘯𝘪𝘯𝘨 𝘶𝘯𝘥𝘦𝘳 𝘵𝘩𝘦
𝘴𝘶𝘱𝘦𝘳𝘷𝘪𝘴𝘪𝘰𝘯
• 𝘚𝘶𝘱𝘦𝘳𝘷𝘪𝘴𝘪𝘯𝘨 𝘵𝘩𝘦 𝘣𝘶𝘴𝘪𝘯𝘦𝘴𝘴 𝘥𝘦𝘷𝘦𝘭𝘰𝘱𝘮𝘦𝘯𝘵 𝘱𝘳𝘰𝘤𝘦𝘴𝘴 𝘢𝘯𝘥 𝘴𝘢𝘭𝘦𝘴 & 𝘮𝘢𝘳𝘬𝘦𝘵𝘪𝘯𝘨 𝘵𝘦𝘢𝘮
𝘵𝘰 𝘨𝘦𝘯𝘦𝘳𝘢𝘵𝘦 𝘭𝘦𝘢𝘥𝘴 𝘸𝘰𝘳𝘵𝘩 𝘮𝘰𝘳𝘦 𝘵𝘩𝘢𝘯 1 𝘮𝘪𝘭𝘭𝘪𝘰𝘯 𝘋𝘰𝘭𝘭𝘢𝘳𝘴
• 𝘈𝘴𝘴𝘪𝘴𝘵𝘦𝘥 𝘢𝘯𝘥 𝘱𝘳𝘰𝘤𝘵𝘰𝘳𝘦𝘥 𝘊𝘈𝘌 𝘚𝘰𝘧𝘵𝘚𝘺𝘴’ 𝘊𝘈𝘋/𝘊𝘈𝘔 𝘤𝘭𝘢𝘴𝘴𝘦𝘴 𝘢𝘭𝘰𝘯𝘨 𝘸𝘪𝘵𝘩 𝘵𝘩𝘦
𝘪𝘯𝘴𝘵𝘳𝘶𝘤𝘵𝘰𝘳𝘴
• 𝘔𝘢𝘪𝘯𝘵𝘢𝘪𝘯𝘦𝘥 𝘢𝘯𝘥 𝘗𝘳𝘰𝘨𝘳𝘢𝘮𝘮𝘦𝘥 𝘡𝘰𝘩𝘰 𝘊𝘙𝘔 𝘥𝘢𝘵𝘢𝘣𝘢𝘴𝘦 𝘢𝘯𝘥 𝘢𝘴𝘴𝘪𝘴𝘵𝘦𝘥 𝘪𝘯 𝘣𝘶𝘪𝘭𝘥𝘪𝘯𝘨
𝘘𝘔𝘚 𝘸𝘪𝘵𝘩 𝘥𝘢𝘵𝘢𝘣𝘢𝘴𝘦
𝘢𝘥𝘮𝘪𝘯𝘪𝘴𝘵𝘳𝘢𝘵𝘰𝘳
• 𝘚𝘶𝘱𝘱𝘰𝘳𝘵𝘦𝘥 𝘪𝘯 𝘵𝘦𝘤𝘩𝘯𝘪𝘤𝘢𝘭 𝘸𝘳𝘪𝘵𝘪𝘯𝘨 𝘧𝘰𝘳 𝘣𝘪𝘥 𝘱𝘳𝘰𝘱𝘰𝘴𝘢𝘭 𝘶𝘯𝘥𝘦𝘳 𝘵𝘩𝘦 𝘱𝘳𝘰𝘤𝘶𝘳𝘦𝘮𝘦𝘯𝘵
𝘮𝘢𝘯𝘢𝘨𝘦𝘳, 𝘢𝘯𝘥 𝘮𝘢𝘪𝘯𝘵𝘢𝘪𝘯𝘦𝘥
𝘴𝘶𝘱𝘱𝘭𝘺 𝘤𝘩𝘢𝘪𝘯 𝘴𝘺𝘴𝘵𝘦𝘮 𝘸𝘪𝘵𝘩 𝘷𝘦𝘯𝘥𝘰𝘳𝘴
• 𝘋𝘦𝘴𝘪𝘨𝘯 𝘝𝘢𝘭𝘪𝘥𝘢𝘵𝘪𝘰𝘯 𝘸𝘪𝘵𝘩 𝘳𝘦𝘴𝘱𝘦𝘤𝘵 𝘵𝘰 𝘢𝘱𝘱𝘭𝘪𝘤𝘢𝘣𝘭𝘦 𝘍𝘈𝘈 𝘳𝘦𝘲𝘶𝘪𝘳𝘦𝘮𝘦𝘯𝘵𝘴 𝘧𝘰𝘳 𝘢𝘪𝘳𝘤𝘳𝘢𝘧𝘵
𝘴𝘦𝘢𝘵𝘴 𝘶𝘵𝘪𝘭𝘪𝘻𝘪𝘯𝘨 𝘢𝘯𝘢𝘭𝘺𝘵𝘪𝘤𝘢𝘭 𝘱𝘳𝘰𝘤𝘦𝘴𝘴 𝘢𝘯𝘥 𝘵𝘦𝘴𝘵𝘪𝘯𝘨 𝘢𝘴 𝘯𝘦𝘤𝘦𝘴𝘴𝘢𝘳𝘺
• 𝘚𝘦𝘵𝘵𝘪𝘯𝘨 𝘶𝘱 𝘵𝘩𝘦 𝘮𝘰𝘥𝘦𝘭 𝘧𝘰𝘳 𝘪𝘮𝘱𝘢𝘤𝘵 𝘴𝘪𝘮𝘶𝘭𝘢𝘵𝘪𝘰𝘯 𝘶𝘴𝘪𝘯𝘨 𝘈𝘭𝘵𝘢𝘪𝘳 𝘵𝘰𝘰𝘭𝘴 𝘢𝘯𝘥/𝘰𝘳 𝘓𝘚-
𝘗𝘳𝘦𝘱𝘰𝘴𝘵
• 𝘗𝘦𝘳𝘧𝘰𝘳𝘮 𝘯𝘦𝘤𝘦𝘴𝘴𝘢𝘳𝘺 𝘯𝘰𝘯-𝘭𝘪𝘯𝘦𝘢𝘳 𝘥𝘺𝘯𝘢𝘮𝘪𝘤 𝘢𝘯𝘥 𝘴𝘵𝘢𝘵𝘪𝘤 𝘴𝘪𝘮𝘶𝘭𝘢𝘵𝘪𝘰𝘯𝘴 𝘶𝘴𝘪𝘯𝘨 𝘓𝘚-𝘋𝘠𝘕𝘈
• 𝘗𝘦𝘳𝘧𝘰𝘳𝘮 𝘍𝘌𝘈 𝘰𝘯 𝘥𝘦𝘵𝘢𝘪𝘭 𝘱𝘢𝘳𝘵𝘴 𝘢𝘯𝘥 𝘢𝘴𝘴𝘦𝘮𝘣𝘭𝘪𝘦𝘴 𝘵𝘰 𝘷𝘦𝘳𝘪𝘧𝘺.
He has worked as a 𝐆𝐫𝐚𝐝𝐮𝐚𝐭𝐞 𝐑𝐞𝐬𝐞𝐚𝐫𝐜𝐡 𝐀𝐬𝐬𝐢𝐬𝐭𝐚𝐧𝐭 at 𝗪𝗰𝗵𝗶𝘁𝗮 𝗦𝘁𝗮𝘁𝗲 𝗨𝗻𝗶𝘃𝗲𝗿𝘀𝗶𝘁𝘆 at Wichita, Kansas, USA.
(January 2016 – November 2017).
He worked as a 𝐆𝐫𝐚𝐝𝐮𝐚𝐭𝐞 𝐓𝐞𝐚𝐜𝐡𝐢𝐧𝐠 𝐀𝐬𝐬𝐢𝐬𝐭𝐚𝐧𝐭 at 𝗪𝗰𝗵𝗶𝘁𝗮 𝗦𝘁𝗮𝘁𝗲 𝗨𝗻𝗶𝘃𝗲𝗿𝘀𝗶𝘁𝘆 at Wichita, Kansas, USA(August 2014 – August 2015).
He worked as a 𝐅𝐄𝐀 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫 at 𝗛𝗶-𝗧𝗲𝗰𝗵 𝗕𝗮𝗻𝗴𝗹𝗮 𝗘𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴 𝗦𝗲𝗿𝘃𝗶𝗰𝗲𝘀, 𝗜𝗻𝗰. (May 2017 – August 2017) Dallas, Texas, USA.
On the following role –
• 𝘋𝘦𝘴𝘪𝘨𝘯 3-𝘋 𝘮𝘰𝘥𝘦𝘭𝘴 & 𝘦𝘯𝘨𝘪𝘯𝘦𝘦𝘳𝘪𝘯𝘨 𝘥𝘳𝘢𝘸𝘪𝘯𝘨𝘴 𝘧𝘰𝘳 𝘯𝘦𝘸 𝘱𝘳𝘰𝘥𝘶𝘤𝘵 𝘶𝘴𝘪𝘯𝘨 𝘊𝘈𝘛𝘐𝘈 𝘝5
& 𝘚𝘰𝘭𝘪𝘥𝘸𝘰𝘳𝘬𝘴
• 𝘗𝘦𝘳𝘧𝘰𝘳𝘮 𝘍𝘌𝘈 𝘰𝘯 𝘥𝘪𝘧𝘧𝘦𝘳𝘦𝘯𝘵 𝘮𝘦𝘤𝘩𝘢𝘯𝘪𝘤𝘢𝘭 𝘱𝘢𝘳𝘵𝘴 𝘶𝘴𝘪𝘯𝘨 𝘈𝘣𝘢𝘤𝘶𝘴 & 𝘕𝘈𝘚𝘛𝘙𝘈𝘕/
𝘗𝘈𝘛𝘙𝘈𝘕
• 𝘊𝘰𝘯𝘥𝘶𝘤𝘵 𝘦𝘯𝘨𝘪𝘯𝘦𝘦𝘳𝘪𝘯𝘨 𝘢𝘯𝘢𝘭𝘺𝘴𝘪𝘴, 𝘪𝘯𝘤𝘭𝘶𝘥𝘪𝘯𝘨 𝘣𝘭𝘶𝘦𝘱𝘳𝘪𝘯𝘵 𝘳𝘦𝘢𝘥𝘪𝘯𝘨, 𝘥𝘳𝘢𝘸𝘪𝘯𝘨𝘴 𝘢𝘯𝘥
𝘴𝘱𝘦𝘤𝘪𝘧𝘪𝘤𝘢𝘵𝘪𝘰𝘯𝘴
• 𝘗𝘳𝘰𝘷𝘪𝘥𝘦 𝘛𝘦𝘤𝘩𝘯𝘪𝘤𝘢𝘭 𝘴𝘶𝘱𝘱𝘰𝘳𝘵 & 𝘵𝘳𝘢𝘪𝘯𝘪𝘯𝘨 𝘵𝘰 𝘤𝘶𝘴𝘵𝘰𝘮𝘦𝘳𝘴 𝘪𝘯 𝘋𝘢𝘴𝘴𝘢𝘶𝘭𝘵 𝘱𝘳𝘰𝘥𝘶𝘤𝘵𝘴
(𝘊𝘈𝘛𝘐𝘈, 𝘚𝘐𝘔𝘜𝘓𝘐𝘈, 𝘚𝘖𝘓𝘐𝘋𝘞𝘖𝘙𝘒𝘚)
• 𝘚𝘵𝘳𝘦𝘴𝘴 𝘢𝘯𝘢𝘭𝘺𝘴𝘪𝘴 𝘪𝘯 𝘮𝘦𝘵𝘢𝘭𝘭𝘪𝘤, 𝘢𝘯𝘥 𝘤𝘰𝘮𝘱𝘰𝘴𝘪𝘵𝘦 𝘴𝘢𝘯𝘥𝘸𝘪𝘤𝘩 𝘚𝘵𝘳𝘶𝘤𝘵𝘶𝘳𝘦𝘴 𝘶𝘴𝘪𝘯𝘨 𝘍𝘌𝘈,
𝘊𝘓𝘗𝘛 𝘢𝘯𝘥 𝘓𝘔𝘛.
• 𝘗𝘦𝘳𝘧𝘰𝘳𝘮 𝘗𝘳𝘦 𝘢𝘯𝘥 𝘗𝘰𝘴𝘵 𝘱𝘳𝘰𝘤𝘦𝘴𝘴𝘪𝘯𝘨 𝘶𝘴𝘪𝘯𝘨 𝘕𝘈𝘚𝘛𝘙𝘈𝘕 & 𝘗𝘈𝘛𝘙𝘈𝘕
• 𝘞𝘳𝘪𝘵𝘪𝘯𝘨 𝘵𝘦𝘤𝘩𝘯𝘪𝘤𝘢𝘭 𝘤𝘰𝘥𝘦𝘴 𝘶𝘴𝘪𝘯𝘨 𝘔𝘈𝘛𝘓𝘈𝘉/𝘚𝘪𝘮𝘶𝘭𝘪𝘯𝘬 𝘢𝘯𝘥 𝘔𝘈𝘗𝘓𝘌
• 𝘗𝘦𝘳𝘧𝘰𝘳𝘮 𝘍𝘌𝘈 𝘢𝘯𝘢𝘭𝘺𝘴𝘪𝘴 𝘰𝘯 𝘥𝘪𝘧𝘧𝘦𝘳𝘦𝘯𝘵 𝘮𝘦𝘤𝘩𝘢𝘯𝘪𝘤𝘢𝘭 & 𝘈𝘦𝘳𝘰𝘴𝘱𝘢𝘤𝘦 𝘴𝘵𝘳𝘶𝘤𝘵𝘶𝘳𝘦𝘴 𝘶𝘴𝘪𝘯𝘨
𝘈𝘣𝘢𝘤𝘶𝘴
• 𝘊𝘰𝘯𝘥𝘶𝘤𝘵 𝘤𝘰𝘮𝘱𝘰𝘴𝘪𝘵𝘦 𝘮𝘢𝘵𝘦𝘳𝘪𝘢𝘭 𝘧𝘢𝘪𝘭𝘶𝘳𝘦 𝘢𝘯𝘢𝘭𝘺𝘴𝘪𝘴 𝘶𝘴𝘪𝘯𝘨 𝘛𝘴𝘢𝘪 𝘸𝘶, 𝘏𝘪𝘭𝘭, 𝘮𝘢𝘹𝘪𝘮𝘶𝘮
𝘴𝘵𝘳𝘦𝘴𝘴 𝘵𝘩𝘦𝘰𝘳𝘺
He worked as a 𝐂𝐥𝐢𝐦𝐚𝐭𝐞 𝐑𝐞𝐚𝐥𝐢𝐭𝐲 𝐋𝐞𝐚𝐝𝐞𝐫 under the former 𝗨𝗦 𝗩𝗶𝗰𝗲-𝗣𝗿𝗲𝘀𝗶𝗱𝗲𝗻𝘁 Al Gore at Houston, TEXUS, USA in 2016.
He served as a Member of the AIAA – The American Institute of Aeronautics and Astronautics. (October 2014 – December 2015).
He worked as a Member of the Bangladesh Atomic Energy Commission (𝗕𝗔𝗘𝗖) at 𝐁𝐀𝐍𝐆𝐋𝐀𝐃𝐄𝐒𝐇 𝐒𝐎𝐂𝐈𝐄𝐓𝐘 𝐅𝐎𝐑 𝐍𝐎𝐍-𝐃𝐄𝐒𝐓𝐑𝐔𝐂𝐓𝐈𝐕𝐄 𝐓𝐄𝐒𝐓𝐈𝐍𝐆 (February 2013 – December 2015)
He worked as an 𝐀𝐬𝐬𝐢𝐬𝐭𝐚𝐧𝐭 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫 (𝐌𝐞𝐜𝐡𝐚𝐧𝐢𝐜𝐚𝐥) at Biman Bangladesh Airlines. (January 2013 – December 2013). His role at 𝗕𝗶𝗺𝗮𝗻 𝗕𝗮𝗻𝗴𝗹𝗮𝗱𝗲𝘀𝗵 𝗔𝗶𝗿𝗹𝗶𝗻𝗲𝘀 was as follows –
• 𝘗𝘦𝘳𝘧𝘰𝘳𝘮 𝘥𝘪𝘧𝘧𝘦𝘳𝘦𝘯𝘵 𝘵𝘺𝘱𝘦𝘴 𝘰𝘧 𝘱𝘳𝘦𝘷𝘦𝘯𝘵𝘪𝘷𝘦 𝘮𝘢𝘪𝘯𝘵𝘦𝘯𝘢𝘯𝘤𝘦 𝘢𝘯𝘥 𝘙𝘦𝘱𝘢𝘪𝘳
• 𝘙𝘦𝘷𝘪𝘦𝘸 𝘪𝘯𝘴𝘱𝘦𝘤𝘵𝘪𝘰𝘯 𝘳𝘦𝘱𝘰𝘳𝘵𝘴 𝘢𝘯𝘥 𝘳𝘦𝘤𝘰𝘮𝘮𝘦𝘯𝘥 𝘳𝘦𝘱𝘢𝘪𝘳 𝘱𝘭𝘢𝘯𝘴
• 𝘗𝘦𝘳𝘧𝘰𝘳𝘮 𝘦𝘯𝘵𝘳𝘺-𝘭𝘦𝘷𝘦𝘭 𝘦𝘭𝘦𝘤𝘵𝘳𝘪𝘤𝘢𝘭 & 𝘴𝘺𝘴𝘵𝘦𝘮 𝘤𝘰𝘮𝘱𝘰𝘯𝘦𝘯𝘵 𝘢𝘯𝘥 𝘪𝘯𝘴𝘵𝘢𝘭𝘭𝘢𝘵𝘪𝘰𝘯 𝘥𝘦𝘴𝘪𝘨𝘯
He worked as a 𝗟𝗲𝗰𝘁𝘂𝗿𝗲𝗿 at Heritage international college OF AVIATION, SCIENCE
& MANAGEMENT (from January 2013 – December 2013)
He Participated at NASA – National Aeronautics and Space Administration NASA Lunabotics Mining Competition 𝐍𝐀𝐒𝐀’𝐒 𝐋𝐔𝐍𝐀𝐁𝐎𝐓𝐈𝐂𝐒 𝐌𝐈𝐍𝐈𝐍𝐆 𝐂𝐎𝐌𝐏𝐄𝐓𝐈𝐓𝐈𝐎𝐍,𝟐𝟎𝟏𝟑 (August 2012 – May 2013) (10 months long competition held at 𝐍𝐀𝐒𝐀’𝐒 KENNEDY SPACE CENTER, FLORIDA, USA.)
He won the following 4 awards as the outcome of a successful team effort from 𝐍𝐀𝐒𝐀 at NASA’s Fourth Annual Lunabotics Mining Competition –
1) 1𝙨𝙩 𝙥𝙤𝙨𝙞𝙩𝙞𝙤𝙣 𝙞𝙣 𝙤𝙪𝙩𝙧𝙚𝙖𝙘𝙝,
2) 1𝙨𝙩 𝙥𝙤𝙨𝙞𝙩𝙞𝙤𝙣 𝙞𝙣 𝙇𝙪𝙣𝙖 𝙬𝙤𝙧𝙡𝙙 𝙬𝙞𝙙𝙚,
3) 2𝙣𝙙 𝙥𝙤𝙨𝙞𝙩𝙞𝙤𝙣 𝙞𝙣 𝙨𝙮𝙨𝙩𝙚𝙢 𝙚𝙣𝙜𝙞𝙣𝙚𝙚𝙧𝙞𝙣𝙜 𝙙𝙚𝙨𝙞𝙜𝙣 𝙥𝙖𝙥𝙚𝙧,
4) 3𝙧𝙙 𝙥𝙤𝙨𝙞𝙩𝙞𝙤𝙣 𝙞𝙣 𝙏𝙚𝙖𝙢 𝙨𝙥𝙞𝙧𝙞𝙩.
He pursued his M.Sc. in 𝐀𝐞𝐫𝐨𝐬𝐩𝐚𝐜𝐞, 𝐀𝐞𝐫𝐨𝐧𝐚𝐮𝐭𝐢𝐜𝐚𝐥 𝐚𝐧𝐝 𝐀𝐬𝐭𝐫𝐨𝐧𝐚𝐮𝐭𝐢𝐜𝐚𝐥 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫𝐢𝐧𝐠 degree from 𝗪𝗶𝗰𝗵𝗶𝘁𝗮 𝗦𝘁𝗮𝘁𝗲 𝗨𝗻𝗶𝘃𝗲𝗿𝘀𝗶𝘁𝘆. (2014 – 2017)
He achieved numerous International Certifications in his professional career –
1) 𝑨𝒅𝒗𝒂𝒏𝒄𝒆𝒅 𝑷𝒓𝒐𝒅𝒖𝒄𝒕 𝑸𝒖𝒂𝒍𝒊𝒕𝒚 𝑷𝒍𝒂𝒏𝒏𝒊𝒏𝒈
(𝑨𝑷𝑸𝑷) 𝑨𝒔𝒔𝒐𝒄𝒊𝒂𝒕𝒆. (Issued on May 2023)
2) 𝑰𝒎𝒑𝒍𝒆𝒎𝒆𝒏𝒕𝒊𝒏𝒈 𝑺𝒕𝒂𝒕𝒊𝒔𝒕𝒊𝒄𝒂𝒍 𝑷𝒓𝒐𝒄𝒆𝒔𝒔
𝑪𝒐𝒏𝒕𝒓𝒐𝒍 (𝑺𝑷𝑪) (Issued on May 2023)
3) 𝑴𝒆𝒂𝒔𝒖𝒓𝒆𝒎𝒆𝒏𝒕 𝑺𝒚𝒔𝒕𝒆𝒎𝒔 𝑨𝒏𝒂𝒍𝒚𝒔𝒊𝒔
(𝑴𝑺𝑨) 𝒘𝒊𝒕𝒉 𝑨𝒑𝒑𝒍𝒊𝒄𝒂𝒕𝒊𝒐𝒏𝒔 (Issued on Jan 2023)
4) 𝑰𝒎𝒑𝒍𝒆𝒎𝒆𝒏𝒕𝒊𝒏𝒈 𝑭𝒂𝒊𝒍𝒖𝒓𝒆 𝑴𝒐𝒅𝒆 𝒂𝒏𝒅
𝑬𝒇𝒇𝒆𝒄𝒕𝒔 𝑨𝒏𝒂𝒍𝒚𝒔𝒊𝒔 (𝑭𝑴𝑬𝑨) (Issued on Jan 2023)
5) 𝑸𝒖𝒂𝒍𝒊𝒕𝒚 𝑪𝒐𝒓𝒆 𝑻𝒐𝒐𝒍𝒔 – 𝑪𝒐𝒏𝒏𝒆𝒄𝒕 𝒕𝒉𝒆
𝑫𝒐𝒕𝒔 𝒆𝑳𝒆𝒂𝒓𝒏𝒊𝒏𝒈. (Issued on Sep 2022).
His words regarding his professional experiences and area of interest,
“𝐼 𝑎𝑚 𝑎 𝐻𝑖𝑔ℎ𝑙𝑦 𝑚𝑜𝑡𝑖𝑣𝑎𝑡𝑒𝑑 𝑏𝑜𝑡ℎ 𝑡𝑒𝑐ℎ𝑛𝑖𝑐𝑎𝑙𝑙𝑦 𝑎𝑛𝑑 𝑡ℎ𝑒𝑜𝑟𝑒𝑡𝑖𝑐𝑎𝑙𝑙𝑦 𝑐𝑜𝑚𝑝𝑒𝑡𝑒𝑛𝑡 𝑄𝑢𝑎𝑙𝑖𝑡𝑦 𝑎𝑛𝑑 𝑀𝑎𝑛𝑢𝑓𝑎𝑐𝑡𝑢𝑟𝑖𝑛𝑔 𝐸𝑛𝑔𝑖𝑛𝑒𝑒𝑟𝑖𝑛𝑔 𝑝𝑟𝑜𝑓𝑒𝑠𝑠𝑖𝑜𝑛𝑎𝑙 𝑤𝑖𝑡ℎ 𝑚𝑎𝑠𝑡𝑒𝑟’𝑠 𝑑𝑒𝑔𝑟𝑒𝑒 𝑖𝑛 𝐴𝑒𝑟𝑜𝑠𝑝𝑎𝑐𝑒 𝐸𝑛𝑔𝑖𝑛𝑒𝑒𝑟𝑖𝑛𝑔 𝑓𝑟𝑜𝑚 𝑊𝑖𝑐ℎ𝑖𝑡𝑎 𝑆𝑡𝑎𝑡𝑒 𝑈𝑛𝑖𝑣𝑒𝑟𝑠𝑖𝑡𝑦. 𝐾𝑒𝑒𝑛 𝑡𝑜 𝑤𝑜𝑟𝑘 𝑖𝑛 𝑎𝑛𝑦 𝑐ℎ𝑎𝑙𝑙𝑒𝑛𝑔𝑖𝑛𝑔 𝑎𝑛𝑑 𝑝𝑟𝑜𝑓𝑒𝑠𝑠𝑖𝑜𝑛𝑎𝑙 𝑓𝑖𝑒𝑙𝑑 𝑜𝑓 𝐸𝑛𝑔𝑖𝑛𝑒𝑒𝑟𝑖𝑛𝑔 (𝑄𝑢𝑎𝑙𝑖𝑡𝑦 & 𝐴𝑒𝑟𝑜𝑠𝑝𝑎𝑐𝑒) 𝑡𝑜 𝑑𝑒𝑚𝑜𝑛𝑠𝑡𝑟𝑎𝑡𝑒 𝑠ℎ𝑒𝑒𝑟 𝑞𝑢𝑎𝑙𝑖𝑡𝑦 𝑎𝑛𝑑 𝑒𝑥𝑝𝑙𝑜𝑟𝑒 𝑜𝑤𝑛 𝑝𝑜𝑡𝑒𝑛𝑡𝑖𝑎𝑙𝑖𝑡𝑖𝑒𝑠.”
During his undergrad days in 𝗠𝗜𝗦𝗧, he was awarded various prestigious scholarships. He was awarded the prestigious 𝐂𝐄𝐑𝐓𝐈𝐅𝐈𝐂𝐀𝐓𝐄 𝐎𝐅 𝐂𝐎𝐌𝐌𝐀𝐍𝐃𝐀𝐍𝐓 𝐂𝐎𝐌𝐌𝐄𝐍𝐃𝐀𝐓𝐈𝐎𝐍 for his outstanding academic results.
He has several publications as follows-
1. “𝑰𝒏𝒗𝒆𝒔𝒕𝒊𝒈𝒂𝒕𝒊𝒏𝒈 𝑹𝒐𝒗𝒆𝒓 𝑶𝒑𝒆𝒓𝒂𝒕𝒊𝒐𝒏𝒔 𝒂𝒔 𝒑𝒂𝒓𝒕 𝒐𝒇 𝒂𝒏 𝑬𝒙𝒑𝒆𝒓𝒊𝒎𝒆𝒏𝒕𝒂𝒍 𝑫𝒆𝒎𝒐𝒏𝒔𝒕𝒓𝒂𝒕𝒊𝒐𝒏 𝒐𝒇 𝑹𝒐𝒗𝒆𝒓-𝑪𝒖𝒃𝒆𝒔𝒂𝒕 𝑪𝒐𝒍𝒍𝒂𝒃𝒐𝒓𝒂𝒕𝒊𝒐𝒏 𝒂𝒕 𝑾𝑺𝑼’𝒔 11𝒕𝒉 𝑨𝒏𝒏𝒖𝒂𝒍 𝑺𝒚𝒎𝒑𝒐𝒔𝒊𝒖𝒎 𝒐𝒏 𝑮𝒓𝒂𝒅𝒖𝒂𝒕𝒆 𝑹𝒆𝒔𝒆𝒂𝒓𝒄𝒉 𝒂𝒏𝒅 𝑺𝒄𝒉𝒐𝒍𝒂𝒓𝒍𝒚 𝑷𝒓𝒐𝒋𝒆𝒄𝒕𝒔” (Published by 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝘾𝙤𝙣𝙛𝙚𝙧𝙚𝙣𝙘𝙚: 𝗪𝗶𝗰𝗵𝗶𝘁𝗮 𝗦𝘁𝗮𝘁𝗲 𝗨𝗻𝗶𝘃𝗲𝗿𝘀𝗶𝘁𝘆. at 𝗪𝗶𝗰𝗵𝗶𝘁𝗮, 𝙆𝙎, 𝙐𝙎𝘼 on April 22, 2015.)
http://hdl.handle.net/10057/11382
Information by: Ahnaf Tazwar
